With the STARTEC XP-P+ product line, Tyrolit defines a new performance level in flute grinding of carbide cutting tools. Two different diamond qualities and the innovative bond structure lead either to a significant reduction in grinding forces, or to greatly increased profile retention.

• Increased feed rate
• Easy profiling
• Extended dressing intervals

With the STARTEC RC product line, Tyrolit sets new standards in high-performance flute grinding. The new specifications combined with very low grinding forces, provide the highest stock removal rates with low profile wear. The STARTEC RC grinding tools guarantee the highest precision of your tools and optimum surface quality.

• Low grinding forces
• Shortened grinding times
• Reduced profile wear

With its STARTEC XP-P product line, Tyrolit stands for maximum performance and optimum tool quality in flute grinding. The product range will be expanded in the future with new shapes and specifications for machining flanks and face geometries on cutting tools made of carbide.

• Highest edge stability
• Low grinding forces
• Fastest availability

The SOLOTEC product line is the perfect solution for peripheral grinding of carbide and cermet inserts. Bond systems with optimised strength and increased brittleness in combination with new diamond qualities, improves the grinding process and increases workpiece quality.

• High stock removal rate
• Lower grinding forces
• Universally applicable

The SKYTEC XD-1 product line impresses with a particularly high proportion of diamond grit embedded in a specially developed bond. This results in outstanding grinding performance and extremely long tool life.

• Shortened grinding times
• High cutting edge quality
• Highest service life

SKYTEC BASIC+ is an economical solution for the production of PCD and PCBN inserts. This proven product line stands for accurate geometry, minimal edge chipping as well as a bond system with increased porosity.

• High cutting ability
• Lowest edge chipping
• Long tool life

With the new STARTEC CG product line, Tyrolit is responding to increasing demands for grinding wheels. STARTEC CG combines the innovative lightweight technology "N-LW" with diamond grains of the highest quality, therefore raises the standard in centerless through-grinding to a new level.

• Lower pulley weight
• Damping carrier body
• Complete system solution

Resin bonded CBN and diamond grinding wheels for cutting tools made of carbide and HSS.

• Perfect cutting quality
• Low wear
• Low heat generation

These dressing wheels are used for dressing all types of diamond and CBN grinding wheels, regardless of their bond systems. They also allow you to dress delicate coatings with low grinding pressure.

• Gentle dressing process
• Low grinding pressure
• Also for sensitive coatings

The Tyrolit bench stones sharpen and clean all CBN and diamond grinding wheels, and are used in production and re-sharpening applications. The stones are made of aluminium oxide and are available in grit sizes 120 - 600. They can be used for hand-operated and mechanical applications.

• Optimum sharpening process
• Good sharpening effect
• Can be customized